|
|
Oceanside / CDC (Registration Facility)
Phone:(760) 966-4500
Fax: (760) 966-4599
San Diego / Miramar (Training Facility)
Phone: (858) 452-9001
Fax: (858) 546-0638
Orange (Training Facility)
Phone: (714) 685-5340
Fax: (714) 283-3046
TUITION INCLUDES: All course materials, hands-on with demo equipment, continental breakfast, lunch, and/or drinks. Tuition does not include transportation, lodging and meal expenses (except for those included in the course).
CANCELLATION: Cancellation of any registration less than 14 days prior to start date is subject to a cancellation fee equal to 50% of the course tuition. If a student fails to appear, the full amount will be charged.
If total class registrations does not meet the requirements needed to hold the class, OneSource reserves the right to cancel and/or reschedule the training.
ON-SITE TRAINING AVAILABLE: You
can select standard courses from our schedule, or
let Onesource customize a course to meet your
particular needs for a minimum of eight (8) people
on-site at your location. Call us for more
information: (800) 268-8088 |
|
CLICK HERE for
a list of recommended hotels in the area.
|
|
OneSource often offers additional courses over and
above the standard course list. These courses
are offered free of charge, and you are more than
welcome to attend any number of our FREE courses.
Seating is limited, so be sure to check this FREE
listing often, because we are always updating and
adding new courses...
Free Fluke 335A
600amp Digital Clamp Meter when you sign
up for our Fluke Power Quality Hands On Seminar
9/16/08 - from 12:00pm to 4:00pm
Downey Training Facility
View/Print Brochure
We'd like to invite you to this hands on seminar where you'll learn how to detect and prevent power quality problems with the right tools and knowledge.
Reduce expensive plant downtime by
using planned maintenance techniques to
improve power quality. Minimize
equipment failure by improving power
quality. Reduce costly electrical
utility penalties for poor power
quality...
Who should attend?
- Plant Electricians
- Commercial Electrical Contractors
- Facilities Maintenance Technicians
- Process Technicians
- Field Service Technicians
FREE Fluke 62 mini IR Thermometer when you sign up for our
Fluke Thermal Imaging
Hands On Seminar
9/16/08 - from 8:00am to
11:00am
Downey Training Facility
View/Print Brochure
We'd like to invite you to this hands on seminar
where you'll learn how to troubleshoot faster and
avoid downtime using the latest thermal imaging
technology.
Receive Hands-on instruction with an experienced
thermography specialist. Get a consultation with a Fluke expert to customize your
thermal imaging solution. Get insight into real-world applications and examples
What will you learn?
- Fundamentals of thermal imaging
- Commercial Electrical Contractors
- How to troubleshoot using the latest
Fluke thermal imager models
- How to reduce costs using thermal imaging
- How to select the right imager for your application
|
|
|
Our industry is continually advancing and we all need to keep up with the changes. Stay ahead of your competition by joining us for regularly scheduled or custom training courses. To register, simply call our Marketing Department toll-free at (800) 266-8088.
For your convenience, we also accept all three major
credit cards.All courses
listed below will be held at our San
Diego or
Orange locations unless otherwise noted.
|
|
APRIL |
CCP122 - PLC-5 / SLC 500 Fundamentals
2-day course
8:00am-4:00pm
$1,050.00 (USD)
DATE: April 22-23, 2008
LOCATION:
San Diego
Upon completion of this course, you will be able to identify the main components of programmable controllers and describe their functions, describe the flow of information through a programmable controller system, navigate through the RSLogix 5 or RSLogix500 software as well as transfer, monitor, and run projects on a PLC-5 or SLC500 processor and interpret simple ladder logic programs. This course is designed as an introduction to programmable controller systems. The PLC-5 or SLC500 system will be featured using either RSLogix 5 or RSLogix 500 software.
|
|
|
CCPS41 - SLC 500 Programming
4-day course
8:00am - 4:00pm
$1,750.00(USD)
DATE:
April 29-May 2, 2008
LOCATION:
San Diego
This course provides you with the resources and hands-on practice required to efficiently program a SLC 500 processor to meet the requirements of a given specification, using RSLogix 500 software.
In this course, you will create a program, step-by-step, to meet the requirements of a given functional specification. As you build the project, you will gain experience that can be applied to your own RSLogix 500 projects. Each lesson in the course is devoted to a step in the programming sequence. Your instructor will present each step and demonstrate the procedure required to complete it.
|
|
MAY |
CCP153 - ControlLogix Maintenance
4-day course
8:00am - 4:00pm
$1,750.00 (USD)
DATE: May 20-23, 2008
LOCATION: Orange
This course provides you with the necessary resources and hands-on practice to efficiently troubleshoot a previously operational ControlLogix or other Logix 5000 system (ie. CompactLogix, FlexLogix, DriveLogix or SoftLogix). It builds upon your fundamental knowledge of common controller terms and operation, your ability to identify and create fundamental RSLogix 5000 project components, and your experience interpreting basic ladder logic.
This course adds to the skill set by introducing new tasks such as connecting to a network, interpreting project execution, editing ladder logic online, and more.
|
|
JUNE |
CCP146
ControlLogix Fundamentals
2-day course
8:00am-4:00pm
$1,050.00 (USD)
DATE: June 10-11, 2008
LOCATION: San Diego
This course will assist you in
developing and building a solid
foundation with a fundamental knowledge
of ControlLogix and other Logix5000
systems (ie. CompactLogix, FlexLogix,
DriveLogix, and SoftLogix). You
will be introduced to basic Logix5000
concepts and terminology, and you will
be exposed to Logix5000 system hardware,
including hands-on experience with the
ControlLogix platform. You will
also have the opportunity to use
RSLogix5000 software to perform basic
system configuration tasks.
|
|
|
CCP151:
RSLogix 5000 Basic Programming
2-day course
8:00am-4:00pm
$1,050.00 (USD)
DATE: June 12-13, 2008
LOCATION: San Diego
This course is a skill building course
that provides you with a basic
understanding of RSLogix 5000 ladder
logic instructions and terminology.
This course also provides the resources
and hands-on practice required to
program basic ladder logic for any Logix
5000 controller.
You will have an opportunity to use RSLogix 5000 software to perform basic software tasks to meet the requirements of a given functional specification. In addition to using ladder logic, you will be introduced to ladder logic techniques, established standards, and common rules for programming ladder logic.
|
|
|
|
|
JULY
|
|
CCP299:
ControlLogix Fundamentals &Troubleshooting
4.5-day course
8:00am-4:00pm
$2,100.00 (USD)
DATE: July 28 to August 1, 2008
LOCATION: Orange
This course will assist you in developing and building a solid foundation and fundamental knowledge of ControlLogix and other Logix5000 systems (ie. CompactLogix, FlexLogix, DriveLogix, SoftLogix). You will be introduced to basic concepts and terminology, and Logix5000 system hardware. This course builds upon this knowledge and provides you with necessary resources and hands-on practice to efficiently troubleshoot a previously operational Logix5000 system.
You will be presented with a systematic strategy for diagnosing and troubleshooting a variety of system problems, such as software configuration issues, electrical noise, controller, I/O, and other possible hardware issues.
|
|
AUGUST |
CCP143 - RSLogix 5000 Project Development-
RSLogix 5000 Project Development
4-day course
8:00am - 4:00pm
$1,750.00 (USD)
DATE: August 5-8, 2008
LOCATION: Orange
This course builds upon yoru knowledge of common controller terms and operation and your experience with basic ladder logid programming.
This course presents a deeper understanding of project development tasks that are common to all Logix 5000 controllers. Such tasks include organizing tasks and routines, organizing controller data, configuring modules, and sharing data. When developing and testing your project, you will use several Logix 5000 communications netwoks including serial, ControlNet, and EtherNet I/O.
You will also use Producer/Consumer technology to multicast input and output devices, share data between controllers, and control remote I/O.
|
|
|
CCPS41 - SLC 500 Programming
4-day course
8:00am - 4:00pm
$1,750.00(USD)
DATE: August 26-29, 2008
LOCATION:
San Diego
This course provides you with the resources and hands-on practice required to efficiently program a SLC 500 processor to meet the requirements of a given specification, using RSLogix 500 software.
In this course, you will create a program, step-by-step, to meet the requirements of a given functional specification. As you build the project, you will gain experience that can be applied to your own RSLogix 500 projects. Each lesson in the course is devoted to a step in the programming sequence. Your instructor will present each step and demonstrate the procedure required to complete it.
|
| SEPTEMBER
|
CCP122 - PLC-5 / SLC 500 Fundamentals
2-day course
8:00am-4:00pm
$1,050.00 (USD)
DATE: September 3-4, 2008
LOCATION: Orange
Upon completion of this course, you will be able to identify the main components of programmable controllers and describe their functions, describe the flow of information through a programmable controller system, navigate through the RSLogix 5 or RSLogix500 software as well as transfer, monitor, and run projects on a PLC-5 or SLC500 processor and interpret simple ladder logic programs. This course is designed as an introduction to programmable controller systems. The PLC-5 or SLC500 system will be featured using either RSLogix 5 or RSLogix 500 software.
|
|
CCP146
ControlLogix Fundamentals
2-day course
8:00am-4:00pm
$1,050.00 (USD)
DATE: September 30
- October 1, 2008
LOCATION: San Diego
This course will assist you in
developing and building a solid
foundation with a fundamental knowledge
of ControlLogix and other Logix5000
systems (ie. CompactLogix, FlexLogix,
DriveLogix, and SoftLogix). You
will be introduced to basic Logix5000
concepts and terminology, and you will
be exposed to Logix5000 system hardware,
including hands-on experience with the
ControlLogix platform. You will
also have the opportunity to use
RSLogix5000 software to perform basic
system configuration tasks.
|
|
OCTOBER
|
|
CCP151:
RSLogix 5000 Basic Programming
2-day course
8:00am-4:00pm
$1,050.00 (USD)
DATE: October 2-3, 2008
LOCATION: Orange
This course is a skill building course
that provides you with a basic
understanding of RSLogix 5000 ladder
logic instructions and terminology.
This course also provides the resources
and hands-on practice required to
program basic ladder logic for any Logix
5000 controller.
You will have an opportunity to use RSLogix 5000 software to perform basic software tasks to meet the requirements of a given functional specification. In addition to using ladder logic, youi will be introduced to ladder logic techniques, established standards, and common rules for programming ladder logic.
|
|
CCP153
ControlLogix
Maintenance & Troubleshooting
4-day course
8:00am-4:00pm
$1,750.00 (USD)
DATE: October 7-10, 2008
LOCATION: Orange
This course provides you with the necessary resources and hands-on practice to efficiently troubleshoot a previously operational ControlLogix or other Logix 5000 system (ie. CompactLogix, FlexLogix, DriveLogix or SoftLogix). It builds upon your fundamental knowledge of common controller terms and operation, your ability to identify and create fundamental RSLogix 5000 project components, and your experience interpreting basic ladder logic.
This course adds to the skill set by introducing new tasks such as connecting to a network, interpreting project execution, editing ladder logic online, and more.
|
|
|
|